High Sensitivity Detection

High Sensitivity Detection

 

Senator 25 is designed to provide very high sensitivity smoke detection in a small package.

ClassiFire-3D is the most comprehensive intelligence found in a smoke detection system to date and ClassiFire-3D ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup.

The detector is designed to fit into a Docking Station. All sampling pipes and cables are connected to the Docking Station as a first fix operation leaving the detector to be fitted during the final commissioning phase if required. This ensures that detectors are less likely to be damaged during the installation.

Upgradable volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems.

Features
  • Ultra small low cost aspirating smoke detector for easy and discreet installation.
  • High sensitivity provided by laser based forward light scatter for reliable early warning.
  • Single sampling pipe up to 50m in length (still air).
  • Unique ClassiFire-3D® Perceptive Artificial Intelligence System.
  • Laser Dust Discrimination (LDD) with a patented dust management and separator system.
  • RS485 communications built in as standard for networking and remote communications.

Senator 100 is designed to provide very high sensitivity smoke detection in a small package. ClassiFire-3D is the most comprehensive intelligence found in a smoke detection system to date and ClassiFire-3D ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup. The detector is designed to fit into a Docking Station. All sampling pipes and cables are connected to the Docking Station as a first fix operation leaving the detector to be fitted during the final commissioning phase if required. This ensures that detectors are less likely to be damaged during the installation.

Features
  •  Small low cost aspirating smoke detector for easy and discreet installation.
  •  High ensitivity provided by laser based forward light scatter for reliable early warning.
  •  Two sampling pipes (100m aggregate) for flexibility.
  •  Unique ClassiFire-3D® Perceptive Artificial Intelligence System.
  •  Laser Dust Discrimination (LDD) with a patented dust management and separator system.
  •  RS485 communications built in as standard for networking and remote communications.

Senator 200 can be provided as a standard detector or as a detector c/w command module, the command module provides central monitoring and display of detectors on a SenseNET network. Volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems.

Senator 200 is also provided with 3 pairs of remote control input terminals which can be configured for a number of functions. It can be programmed through the front panel, via a command module or PC.

Features
  •  High sensitivity provided by laser based forward light scatter for reliable early warning.
  •  Unique ClassiFire-3D® Perceptive Artificial Intelligence System.
  •  Laser Dust Discrimination (LDD) with a patented dust management and separator system.
  •  4 sampling pipes up to 250m maximum total length.
  •  RS485 communications built in as standard for networking and remote communications.
  •  LPCB approved sampling fo up to 100 sampling holes.

The Hart XL High Sensitivity Smoke Detection system (HSSD®) is an aspirating fire detection system designed to give very early indication of an incipient fire condition. This pre-emptive warning - before the transition into the flaming and heat stages - provides the time necessary to take corrective action and avoid the danger, damage and disruption to operations that a fire can cause. Hart XL is simple to install, commission, service and use. It has the highest levels of performance and reliability.

Features
  • Laser based particle counting - the superior technology
  • No particle filters required
  • No recalibration during lifetime of detector
  • On site sensitivity selection 0.0025%/m to 1%/m
  • Modular design for fast and easy servicing
  • Networkable up to 127 units.

SnifferPipe is a comprehensive range of high quality pipe, fittings and accessories for aspirating smoke detection systems such as the HART XL High Sensitivity Smoke Detection (HSSD)® system.

Features
  • Efficient and robust
  • Smooth bore to facilitate air flow to the detector
  • Lightweight and easy to install
  • High resistance to chemicals and weathering
  • Suitable for use over wide temperature range of - 40°C to +80°C
Syndicate content